Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
GitHub
parent
f7ef8a14bd
commit
16727644bb
10101 changed files with 1871226 additions and 1860967 deletions
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
File diff suppressed because it is too large
Load diff
|
|
@ -1,43 +1,43 @@
|
|||
{
|
||||
"version": "1.0.0.4",
|
||||
"high_temp_filament": [
|
||||
"ABS",
|
||||
"ASA",
|
||||
"ASA-CF",
|
||||
"PC",
|
||||
"PA",
|
||||
"PA-CF",
|
||||
"PA-GF",
|
||||
"PA6-CF",
|
||||
"PET-CF",
|
||||
"PPS",
|
||||
"PPS-CF",
|
||||
"PPA-CF",
|
||||
"PPA-GF",
|
||||
"ABS-GF",
|
||||
"ASA-AERO"
|
||||
],
|
||||
"low_temp_filament": [
|
||||
"PLA",
|
||||
"TPU",
|
||||
"TPU-AMS",
|
||||
"PLA-CF",
|
||||
"PLA-AERO",
|
||||
"PVA",
|
||||
"BVOH",
|
||||
"PCTG",
|
||||
"PETG",
|
||||
"PETG-CF",
|
||||
"SBS"
|
||||
],
|
||||
"high_low_compatible_filament":[
|
||||
"HIPS",
|
||||
"PE",
|
||||
"PP",
|
||||
"EVA",
|
||||
"PE-CF",
|
||||
"PP-CF",
|
||||
"PP-GF",
|
||||
"PHA"
|
||||
]
|
||||
}
|
||||
"version": "1.0.0.4",
|
||||
"high_temp_filament": [
|
||||
"ABS",
|
||||
"ASA",
|
||||
"ASA-CF",
|
||||
"PC",
|
||||
"PA",
|
||||
"PA-CF",
|
||||
"PA-GF",
|
||||
"PA6-CF",
|
||||
"PET-CF",
|
||||
"PPS",
|
||||
"PPS-CF",
|
||||
"PPA-CF",
|
||||
"PPA-GF",
|
||||
"ABS-GF",
|
||||
"ASA-AERO"
|
||||
],
|
||||
"low_temp_filament": [
|
||||
"PLA",
|
||||
"TPU",
|
||||
"TPU-AMS",
|
||||
"PLA-CF",
|
||||
"PLA-AERO",
|
||||
"PVA",
|
||||
"BVOH",
|
||||
"PCTG",
|
||||
"PETG",
|
||||
"PETG-CF",
|
||||
"SBS"
|
||||
],
|
||||
"high_low_compatible_filament": [
|
||||
"HIPS",
|
||||
"PE",
|
||||
"PP",
|
||||
"EVA",
|
||||
"PE-CF",
|
||||
"PP-CF",
|
||||
"PP-GF",
|
||||
"PHA"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,41 +1,41 @@
|
|||
{
|
||||
"incompatible_nozzles":{
|
||||
"Standard":{
|
||||
"0.2":[
|
||||
"Bambu PLA Marble",
|
||||
"Bambu PLA Sparkle",
|
||||
"Bambu PLA Wood",
|
||||
"Bambu PLA Galaxy",
|
||||
"Bambu PETG Translucent"
|
||||
],
|
||||
"0.4":[],
|
||||
"0.6":[
|
||||
"Bambu PLA Silk+",
|
||||
"Bambu PLA Silk",
|
||||
"Bambu PLA Aero",
|
||||
"Bambu ASA-Aero"
|
||||
],
|
||||
"0.8":[
|
||||
"Bambu PLA Silk+",
|
||||
"Bambu PLA Silk",
|
||||
"Bambu PLA Aero",
|
||||
"Bambu ASA-Aero"
|
||||
]
|
||||
},
|
||||
"High Flow":{
|
||||
"0.4":[
|
||||
"Bambu PLA-CF",
|
||||
"Bambu PETG-CF",
|
||||
"Bambu ASA-CF",
|
||||
"Bambu PAHT-CF",
|
||||
"Bambu PET-CF",
|
||||
"Bambu PA6-CF",
|
||||
"Bambu PA6-GF",
|
||||
"Bambu PPA-CF",
|
||||
"Bambu PPS-CF"
|
||||
],
|
||||
"0.6":[],
|
||||
"0.8":[]
|
||||
}
|
||||
}
|
||||
}
|
||||
"incompatible_nozzles": {
|
||||
"Standard": {
|
||||
"0.2": [
|
||||
"Bambu PLA Marble",
|
||||
"Bambu PLA Sparkle",
|
||||
"Bambu PLA Wood",
|
||||
"Bambu PLA Galaxy",
|
||||
"Bambu PETG Translucent"
|
||||
],
|
||||
"0.4": [],
|
||||
"0.6": [
|
||||
"Bambu PLA Silk+",
|
||||
"Bambu PLA Silk",
|
||||
"Bambu PLA Aero",
|
||||
"Bambu ASA-Aero"
|
||||
],
|
||||
"0.8": [
|
||||
"Bambu PLA Silk+",
|
||||
"Bambu PLA Silk",
|
||||
"Bambu PLA Aero",
|
||||
"Bambu ASA-Aero"
|
||||
]
|
||||
},
|
||||
"High Flow": {
|
||||
"0.4": [
|
||||
"Bambu PLA-CF",
|
||||
"Bambu PETG-CF",
|
||||
"Bambu ASA-CF",
|
||||
"Bambu PAHT-CF",
|
||||
"Bambu PET-CF",
|
||||
"Bambu PA6-CF",
|
||||
"Bambu PA6-GF",
|
||||
"Bambu PPA-CF",
|
||||
"Bambu PPS-CF"
|
||||
],
|
||||
"0.6": [],
|
||||
"0.8": []
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,11 +1,11 @@
|
|||
{
|
||||
"version": "1.0.0.3",
|
||||
"nozzle_hrc": {
|
||||
"hardened_steel": 55,
|
||||
"stainless_steel": 20,
|
||||
"tungsten_carbide": 85,
|
||||
"brass": 2,
|
||||
"E3D": 55,
|
||||
"undefine": 0
|
||||
}
|
||||
}
|
||||
"version": "1.0.0.3",
|
||||
"nozzle_hrc": {
|
||||
"hardened_steel": 55,
|
||||
"stainless_steel": 20,
|
||||
"tungsten_carbide": 85,
|
||||
"brass": 2,
|
||||
"E3D": 55,
|
||||
"undefine": 0
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -3,7 +3,10 @@
|
|||
"display_name": "Bambu Lab X1 Carbon",
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "720p", "1080p" ],
|
||||
"resolution_supported": [
|
||||
"720p",
|
||||
"1080p"
|
||||
],
|
||||
"virtual_camera": "enabled",
|
||||
"liveview": {
|
||||
"remote": "tutk"
|
||||
|
|
@ -13,7 +16,10 @@
|
|||
"model_download": "enabled"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 300 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
300
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
||||
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
||||
|
|
@ -50,15 +56,25 @@
|
|||
"support_ams_ext_mix_print": true
|
||||
},
|
||||
"model_id": "BL-P001",
|
||||
"compatible_machine": [ "BL-P002", "C11", "C12", "C13" ],
|
||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
||||
"compatible_machine": [
|
||||
"BL-P002",
|
||||
"C11",
|
||||
"C12",
|
||||
"C13"
|
||||
],
|
||||
"auto_cali_not_support_filaments": [
|
||||
"GFU03",
|
||||
"GFU04"
|
||||
],
|
||||
"support_wrapping_detection": false,
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||
"printer_type": "3DPrinter-X1-Carbon",
|
||||
"printer_thumbnail_image": "printer_thumbnail_x1c",
|
||||
"printer_connect_help_image": "input_access_code_x1",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_xp"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_xp"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_x1",
|
||||
|
|
@ -101,4 +117,4 @@
|
|||
"support_user_preset": true
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -3,7 +3,10 @@
|
|||
"display_name": "Bambu Lab X1",
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "720p", "1080p" ],
|
||||
"resolution_supported": [
|
||||
"720p",
|
||||
"1080p"
|
||||
],
|
||||
"virtual_camera": "enabled",
|
||||
"liveview": {
|
||||
"remote": "tutk"
|
||||
|
|
@ -13,7 +16,10 @@
|
|||
"model_download": "enabled"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 300 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
300
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
||||
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
||||
|
|
@ -51,14 +57,24 @@
|
|||
},
|
||||
"model_id": "BL-P002",
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||
"compatible_machine": [ "BL-P001", "C11", "C12", "C13" ],
|
||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
||||
"compatible_machine": [
|
||||
"BL-P001",
|
||||
"C11",
|
||||
"C12",
|
||||
"C13"
|
||||
],
|
||||
"auto_cali_not_support_filaments": [
|
||||
"GFU03",
|
||||
"GFU04"
|
||||
],
|
||||
"printer_type": "3DPrinter-X1",
|
||||
"printer_thumbnail_image": "printer_thumbnail",
|
||||
"support_wrapping_detection": false,
|
||||
"printer_connect_help_image": "input_access_code_x1",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_xp"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_xp"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_x1",
|
||||
|
|
@ -101,4 +117,4 @@
|
|||
"support_user_preset": true
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -3,12 +3,17 @@
|
|||
"display_name": "Bambu Lab P1P",
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "720p" ],
|
||||
"resolution_supported": [
|
||||
"720p"
|
||||
],
|
||||
"liveview": {
|
||||
"local": "local"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 300 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
300
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/p1/maintenance/complete-hot-end-assembly",
|
||||
"en": "https://wiki.bambulab.com/en/p1/maintenance/complete-hot-end-assembly"
|
||||
|
|
@ -47,14 +52,24 @@
|
|||
"model_id": "C11",
|
||||
"support_wrapping_detection": false,
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||
"compatible_machine": [ "BL-P001", "BL-P002", "C12", "C13" ],
|
||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
||||
"compatible_machine": [
|
||||
"BL-P001",
|
||||
"BL-P002",
|
||||
"C12",
|
||||
"C13"
|
||||
],
|
||||
"auto_cali_not_support_filaments": [
|
||||
"GFU03",
|
||||
"GFU04"
|
||||
],
|
||||
"printer_type": "C11",
|
||||
"ftp_folder": "sdcard/",
|
||||
"printer_thumbnail_image": "printer_thumbnail_p1p",
|
||||
"printer_connect_help_image": "input_access_code_p1p",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_xp"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_xp"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_p1p",
|
||||
|
|
|
|||
|
|
@ -3,12 +3,17 @@
|
|||
"display_name": "Bambu Lab P1S",
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "720p" ],
|
||||
"resolution_supported": [
|
||||
"720p"
|
||||
],
|
||||
"liveview": {
|
||||
"local": "local"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 300 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
300
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/p1/maintenance/complete-hot-end-assembly",
|
||||
"en": "https://wiki.bambulab.com/en/p1/maintenance/complete-hot-end-assembly"
|
||||
|
|
@ -47,14 +52,24 @@
|
|||
"model_id": "C12",
|
||||
"support_wrapping_detection": false,
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||
"compatible_machine": [ "BL-P001", "BL-P002", "C11", "C13" ],
|
||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
||||
"compatible_machine": [
|
||||
"BL-P001",
|
||||
"BL-P002",
|
||||
"C11",
|
||||
"C13"
|
||||
],
|
||||
"auto_cali_not_support_filaments": [
|
||||
"GFU03",
|
||||
"GFU04"
|
||||
],
|
||||
"printer_type": "C12",
|
||||
"ftp_folder": "sdcard/",
|
||||
"printer_thumbnail_image": "printer_thumbnail_p1s",
|
||||
"printer_connect_help_image": "input_access_code_p1p",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_xp"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_xp"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_p1p",
|
||||
|
|
@ -69,7 +84,9 @@
|
|||
},
|
||||
"01.03.50.01": {
|
||||
"engineer": "00.06.03.51",
|
||||
"resolution_supported": ["720p"],
|
||||
"resolution_supported": [
|
||||
"720p"
|
||||
],
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"liveview": {
|
||||
|
|
|
|||
|
|
@ -3,7 +3,10 @@
|
|||
"display_name": "Bambu Lab X1E",
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "720p", "1080p" ],
|
||||
"resolution_supported": [
|
||||
"720p",
|
||||
"1080p"
|
||||
],
|
||||
"virtual_camera": "enabled",
|
||||
"liveview": {
|
||||
"remote": "tutk"
|
||||
|
|
@ -13,7 +16,10 @@
|
|||
"model_download": "enabled"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 320 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
320
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
||||
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
||||
|
|
@ -46,7 +52,10 @@
|
|||
"support_first_layer_inspect": true,
|
||||
"support_chamber": true,
|
||||
"support_chamber_temp_edit": true,
|
||||
"support_chamber_temp_edit_range": [0, 60],
|
||||
"support_chamber_temp_edit_range": [
|
||||
0,
|
||||
60
|
||||
],
|
||||
"support_extrusion_cali": false,
|
||||
"support_user_preset": false,
|
||||
"bed_temperature_limit": 110,
|
||||
|
|
@ -56,13 +65,23 @@
|
|||
"model_id": "C13",
|
||||
"support_wrapping_detection": false,
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||
"compatible_machine": [ "BL-P001", "BL-P002", "C11", "C12" ],
|
||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
||||
"compatible_machine": [
|
||||
"BL-P001",
|
||||
"BL-P002",
|
||||
"C11",
|
||||
"C12"
|
||||
],
|
||||
"auto_cali_not_support_filaments": [
|
||||
"GFU03",
|
||||
"GFU04"
|
||||
],
|
||||
"printer_type": "C13",
|
||||
"printer_thumbnail_image": "printer_thumbnail_x1e",
|
||||
"printer_connect_help_image": "input_access_code_x1",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_xp"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_xp"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_x1",
|
||||
|
|
@ -74,4 +93,4 @@
|
|||
"01.05.06.06": {
|
||||
"rv2166": "00.00.21.20"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -3,13 +3,18 @@
|
|||
"display_name": "Bambu Lab A1 mini",
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "720p" ],
|
||||
"resolution_supported": [
|
||||
"720p"
|
||||
],
|
||||
"liveview": {
|
||||
"local": "local",
|
||||
"remote": "tutk"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 300 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
300
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/a1-mini/maintenance/hotend-heating-assembly-replacement",
|
||||
"en": "https://wiki.bambulab.com/en/a1-mini/maintenance/hotend-heating-assembly-replacement"
|
||||
|
|
@ -48,13 +53,18 @@
|
|||
"support_wrapping_detection": false,
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_i3",
|
||||
"compatible_machine": [],
|
||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
||||
"auto_cali_not_support_filaments": [
|
||||
"GFU03",
|
||||
"GFU04"
|
||||
],
|
||||
"printer_type": "N1",
|
||||
"ftp_folder": "sdcard/",
|
||||
"printer_thumbnail_image": "printer_thumbnail_n1",
|
||||
"printer_connect_help_image": "input_access_code_n1",
|
||||
"printer_use_ams_image": "extra_icon",
|
||||
"printer_ext_image": ["ext_image_n1"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_n1"
|
||||
],
|
||||
"use_ams_type": "f1",
|
||||
"printer_arch": "i3",
|
||||
"printer_series": "series_n",
|
||||
|
|
@ -73,4 +83,4 @@
|
|||
"support_user_preset": true
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -3,13 +3,18 @@
|
|||
"display_name": "Bambu Lab A1",
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "720p" ],
|
||||
"resolution_supported": [
|
||||
"720p"
|
||||
],
|
||||
"liveview": {
|
||||
"local": "local",
|
||||
"remote": "tutk"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 300 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
300
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/a1-mini/maintenance/hotend-heating-assembly-replacement",
|
||||
"en": "https://wiki.bambulab.com/en/a1-mini/maintenance/hotend-heating-assembly-replacement"
|
||||
|
|
@ -46,7 +51,10 @@
|
|||
},
|
||||
"model_id": "N2S",
|
||||
"compatible_machine": [],
|
||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
||||
"auto_cali_not_support_filaments": [
|
||||
"GFU03",
|
||||
"GFU04"
|
||||
],
|
||||
"support_wrapping_detection": false,
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_i3",
|
||||
"printer_type": "N2S",
|
||||
|
|
@ -54,7 +62,9 @@
|
|||
"printer_thumbnail_image": "printer_thumbnail_n2s",
|
||||
"printer_connect_help_image": "input_access_code_n1",
|
||||
"printer_use_ams_image": "extra_icon",
|
||||
"printer_ext_image": ["ext_image_n2s"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_n2s"
|
||||
],
|
||||
"use_ams_type": "f1",
|
||||
"printer_arch": "i3",
|
||||
"printer_series": "series_n",
|
||||
|
|
@ -72,4 +82,4 @@
|
|||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -3,7 +3,9 @@
|
|||
"display_name": "Bambu Lab P2S",
|
||||
"print": {
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "1080p" ],
|
||||
"resolution_supported": [
|
||||
"1080p"
|
||||
],
|
||||
"virtual_camera": "enabled",
|
||||
"liveview": {
|
||||
"remote": "tutk"
|
||||
|
|
@ -14,12 +16,18 @@
|
|||
"model_download": "enabled"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 300 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
300
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
||||
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
||||
},
|
||||
"bed_temp_range": [ 0, 110 ],
|
||||
"bed_temp_range": [
|
||||
0,
|
||||
110
|
||||
],
|
||||
"support_motor_noise_cali": false,
|
||||
"support_tunnel_mqtt": true,
|
||||
"support_mqtt_alive": true,
|
||||
|
|
@ -56,22 +64,22 @@
|
|||
"support_user_preset": false,
|
||||
"support_ams_ext_mix_print": true
|
||||
},
|
||||
"fan" : {
|
||||
"0" :
|
||||
{
|
||||
"fan": {
|
||||
"0": {
|
||||
"description": "",
|
||||
"2": "Right(Aux)",
|
||||
"10": "Left(Aux)"
|
||||
},
|
||||
"1" :
|
||||
{
|
||||
"1": {
|
||||
"2": "Right(Filter)",
|
||||
"10": "Left(Aux)"
|
||||
},
|
||||
"special_cooling_text" : "Cooling mode is suitable for printing PLA/PETG/TPU materials."
|
||||
"special_cooling_text": "Cooling mode is suitable for printing PLA/PETG/TPU materials."
|
||||
},
|
||||
"model_id": "N7",
|
||||
"subseries": ["N7-V2"],
|
||||
"subseries": [
|
||||
"N7-V2"
|
||||
],
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_n7",
|
||||
"support_wrapping_detection": true,
|
||||
"compatible_machine": [],
|
||||
|
|
@ -79,7 +87,9 @@
|
|||
"printer_thumbnail_image": "printer_thumbnail_N7",
|
||||
"printer_connect_help_image": "input_access_code_x1",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_n7"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_n7"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_x1",
|
||||
|
|
@ -88,4 +98,4 @@
|
|||
"enable_set_nozzle_info": false,
|
||||
"support_safety_options": true
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -4,11 +4,16 @@
|
|||
"print": {
|
||||
"2D": {
|
||||
"laser": {
|
||||
"power": [ 10, 40 ]
|
||||
"power": [
|
||||
10,
|
||||
40
|
||||
]
|
||||
}
|
||||
},
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "1080p" ],
|
||||
"resolution_supported": [
|
||||
"1080p"
|
||||
],
|
||||
"virtual_camera": "enabled",
|
||||
"liveview": {
|
||||
"remote": "tutk"
|
||||
|
|
@ -19,12 +24,18 @@
|
|||
"model_download": "enabled"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 350 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
350
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
||||
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
||||
},
|
||||
"bed_temp_range": [ 0, 120 ],
|
||||
"bed_temp_range": [
|
||||
0,
|
||||
120
|
||||
],
|
||||
"support_motor_noise_cali": false,
|
||||
"support_tunnel_mqtt": true,
|
||||
"support_mqtt_alive": true,
|
||||
|
|
@ -56,7 +67,10 @@
|
|||
"support_save_remote_print_file_to_storage": true,
|
||||
"support_chamber": true,
|
||||
"support_chamber_temp_edit": true,
|
||||
"support_chamber_temp_edit_range": [ 0, 65 ],
|
||||
"support_chamber_temp_edit_range": [
|
||||
0,
|
||||
65
|
||||
],
|
||||
"support_chamber_temp_switch_heating": 40,
|
||||
"support_extrusion_cali": false,
|
||||
"support_user_preset": false,
|
||||
|
|
@ -66,13 +80,22 @@
|
|||
"model_id": "O1D",
|
||||
"support_wrapping_detection": true,
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_multi_extruders",
|
||||
"printer_modes": [ "fdm", "laser", "cut" ],
|
||||
"compatible_machine": ["O1E"],
|
||||
"printer_modes": [
|
||||
"fdm",
|
||||
"laser",
|
||||
"cut"
|
||||
],
|
||||
"compatible_machine": [
|
||||
"O1E"
|
||||
],
|
||||
"printer_type": "O1D",
|
||||
"printer_thumbnail_image": "printer_thumbnail_h2d",
|
||||
"printer_connect_help_image": "input_access_code_h2d",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_o_right", "ext_image_o_left"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_o_right",
|
||||
"ext_image_o_left"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_o",
|
||||
|
|
@ -81,4 +104,4 @@
|
|||
"enable_set_nozzle_info": false,
|
||||
"support_safety_options": false
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -4,11 +4,16 @@
|
|||
"print": {
|
||||
"2D": {
|
||||
"laser": {
|
||||
"power": [ 10, 40 ]
|
||||
"power": [
|
||||
10,
|
||||
40
|
||||
]
|
||||
}
|
||||
},
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "1080p" ],
|
||||
"resolution_supported": [
|
||||
"1080p"
|
||||
],
|
||||
"virtual_camera": "enabled",
|
||||
"liveview": {
|
||||
"remote": "tutk"
|
||||
|
|
@ -19,12 +24,18 @@
|
|||
"model_download": "enabled"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 350 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
350
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
||||
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
||||
},
|
||||
"bed_temp_range": [ 0, 120 ],
|
||||
"bed_temp_range": [
|
||||
0,
|
||||
120
|
||||
],
|
||||
"support_motor_noise_cali": false,
|
||||
"support_tunnel_mqtt": true,
|
||||
"support_mqtt_alive": true,
|
||||
|
|
@ -56,7 +67,10 @@
|
|||
"support_save_remote_print_file_to_storage": true,
|
||||
"support_chamber": true,
|
||||
"support_chamber_temp_edit": true,
|
||||
"support_chamber_temp_edit_range": [ 0, 65 ],
|
||||
"support_chamber_temp_edit_range": [
|
||||
0,
|
||||
65
|
||||
],
|
||||
"support_chamber_temp_switch_heating": 40,
|
||||
"support_extrusion_cali": false,
|
||||
"support_user_preset": false,
|
||||
|
|
@ -66,13 +80,22 @@
|
|||
"model_id": "O1E",
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_multi_extruders",
|
||||
"support_wrapping_detection": true,
|
||||
"printer_modes": [ "fdm", "laser", "cut" ],
|
||||
"compatible_machine": ["O1D"],
|
||||
"printer_modes": [
|
||||
"fdm",
|
||||
"laser",
|
||||
"cut"
|
||||
],
|
||||
"compatible_machine": [
|
||||
"O1D"
|
||||
],
|
||||
"printer_type": "O1E",
|
||||
"printer_thumbnail_image": "printer_thumbnail_o1e",
|
||||
"printer_connect_help_image": "input_access_code_h2d",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_o_right", "ext_image_o_left"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_o_right",
|
||||
"ext_image_o_left"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_o",
|
||||
|
|
@ -81,4 +104,4 @@
|
|||
"enable_set_nozzle_info": false,
|
||||
"support_safety_options": false
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -4,11 +4,16 @@
|
|||
"print": {
|
||||
"2D": {
|
||||
"laser": {
|
||||
"power": [ 10, 40 ]
|
||||
"power": [
|
||||
10,
|
||||
40
|
||||
]
|
||||
}
|
||||
},
|
||||
"ipcam": {
|
||||
"resolution_supported": [ "1080p" ],
|
||||
"resolution_supported": [
|
||||
"1080p"
|
||||
],
|
||||
"virtual_camera": "enabled",
|
||||
"liveview": {
|
||||
"remote": "tutk"
|
||||
|
|
@ -19,12 +24,18 @@
|
|||
"model_download": "enabled"
|
||||
}
|
||||
},
|
||||
"nozzle_temp_range": [ 0, 350 ],
|
||||
"nozzle_temp_range": [
|
||||
0,
|
||||
350
|
||||
],
|
||||
"nozzle_replace_wiki": {
|
||||
"zh": "https://wiki.bambulab.com/zh/h2s/maintenance/replace-silicone-sock-and-hotend",
|
||||
"en": "https://wiki.bambulab.com/en/h2s/maintenance/replace-silicone-sock-and-hotend"
|
||||
},
|
||||
"bed_temp_range": [ 0, 120 ],
|
||||
"bed_temp_range": [
|
||||
0,
|
||||
120
|
||||
],
|
||||
"support_motor_noise_cali": false,
|
||||
"support_tunnel_mqtt": true,
|
||||
"support_mqtt_alive": true,
|
||||
|
|
@ -55,7 +66,10 @@
|
|||
"support_first_layer_inspect": false,
|
||||
"support_save_remote_print_file_to_storage": true,
|
||||
"support_chamber_temp_edit": true,
|
||||
"support_chamber_temp_edit_range": [0, 65],
|
||||
"support_chamber_temp_edit_range": [
|
||||
0,
|
||||
65
|
||||
],
|
||||
"support_chamber_temp_switch_heating": 40,
|
||||
"support_extrusion_cali": false,
|
||||
"support_user_preset": false,
|
||||
|
|
@ -63,13 +77,19 @@
|
|||
},
|
||||
"model_id": "O1S",
|
||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_single_o",
|
||||
"printer_modes": [ "fdm", "laser", "cut" ],
|
||||
"printer_modes": [
|
||||
"fdm",
|
||||
"laser",
|
||||
"cut"
|
||||
],
|
||||
"compatible_machine": [],
|
||||
"printer_type": "O1S",
|
||||
"printer_thumbnail_image": "printer_thumbnail_o1s",
|
||||
"printer_connect_help_image": "input_access_code_x1",
|
||||
"printer_use_ams_image": "ams_icon",
|
||||
"printer_ext_image": ["ext_image_o1s"],
|
||||
"printer_ext_image": [
|
||||
"ext_image_o1s"
|
||||
],
|
||||
"use_ams_type": "generic",
|
||||
"printer_arch": "core_xy",
|
||||
"printer_series": "series_o",
|
||||
|
|
@ -78,4 +98,4 @@
|
|||
"enable_set_nozzle_info": false,
|
||||
"support_safety_options": false
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,76 +1,82 @@
|
|||
{
|
||||
"whitelist": [
|
||||
],
|
||||
"blacklist": [
|
||||
{
|
||||
"type": "TPU",
|
||||
"action": "prohibition",
|
||||
"slot": "ams",
|
||||
"description": "TPU is not supported by AMS."
|
||||
},
|
||||
{
|
||||
"vendor": "Bambu Lab",
|
||||
"type": "PET-CF",
|
||||
"action": "prohibition",
|
||||
"slot": "ams",
|
||||
"description": "AMS does not support 'Bambu Lab PET-CF'."
|
||||
},
|
||||
{
|
||||
"type": "TPU",
|
||||
"action": "warning",
|
||||
"description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
|
||||
},
|
||||
{
|
||||
"type": "TPU-AMS",
|
||||
"action": "warning",
|
||||
"description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
|
||||
},
|
||||
{
|
||||
"type": "PVA",
|
||||
"action": "warning",
|
||||
"slot": "ams",
|
||||
"description": "Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use."
|
||||
},
|
||||
{
|
||||
"type": "PVA",
|
||||
"action": "warning",
|
||||
"slot": "ext",
|
||||
"description": "Damp PVA is flexible and may get stuck in extruder. Dry it before use."
|
||||
},
|
||||
{
|
||||
"type": "PPS-CF",
|
||||
"model_id":["O1S"],
|
||||
"action": "warning",
|
||||
"description": "PPS-CF is brittle and could break in bended PTFE tube above Toolhead.",
|
||||
"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
|
||||
},
|
||||
{
|
||||
"type": "PPA-CF",
|
||||
"model_id":["O1S"],
|
||||
"action": "warning",
|
||||
"description": "PPA-CF is brittle and could break in bended PTFE tube above Toolhead.",
|
||||
"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
|
||||
},
|
||||
{
|
||||
"type_suffix": "CF",
|
||||
"action": "warning",
|
||||
"slot": "ams",
|
||||
"description": "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution."
|
||||
},
|
||||
{
|
||||
"type_suffix": "GF",
|
||||
"action": "warning",
|
||||
"slot": "ams",
|
||||
"description": "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution."
|
||||
},
|
||||
{
|
||||
"vendor": "Bambu Lab",
|
||||
"type": "PLA",
|
||||
"name": "PLA Glow",
|
||||
"model_id":["N1","N2S"],
|
||||
"action": "warning",
|
||||
"slot": "ams",
|
||||
"description": "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite."
|
||||
}
|
||||
]
|
||||
"whitelist": [],
|
||||
"blacklist": [
|
||||
{
|
||||
"type": "TPU",
|
||||
"action": "prohibition",
|
||||
"slot": "ams",
|
||||
"description": "TPU is not supported by AMS."
|
||||
},
|
||||
{
|
||||
"vendor": "Bambu Lab",
|
||||
"type": "PET-CF",
|
||||
"action": "prohibition",
|
||||
"slot": "ams",
|
||||
"description": "AMS does not support 'Bambu Lab PET-CF'."
|
||||
},
|
||||
{
|
||||
"type": "TPU",
|
||||
"action": "warning",
|
||||
"description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
|
||||
},
|
||||
{
|
||||
"type": "TPU-AMS",
|
||||
"action": "warning",
|
||||
"description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
|
||||
},
|
||||
{
|
||||
"type": "PVA",
|
||||
"action": "warning",
|
||||
"slot": "ams",
|
||||
"description": "Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use."
|
||||
},
|
||||
{
|
||||
"type": "PVA",
|
||||
"action": "warning",
|
||||
"slot": "ext",
|
||||
"description": "Damp PVA is flexible and may get stuck in extruder. Dry it before use."
|
||||
},
|
||||
{
|
||||
"type": "PPS-CF",
|
||||
"model_id": [
|
||||
"O1S"
|
||||
],
|
||||
"action": "warning",
|
||||
"description": "PPS-CF is brittle and could break in bended PTFE tube above Toolhead.",
|
||||
"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
|
||||
},
|
||||
{
|
||||
"type": "PPA-CF",
|
||||
"model_id": [
|
||||
"O1S"
|
||||
],
|
||||
"action": "warning",
|
||||
"description": "PPA-CF is brittle and could break in bended PTFE tube above Toolhead.",
|
||||
"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
|
||||
},
|
||||
{
|
||||
"type_suffix": "CF",
|
||||
"action": "warning",
|
||||
"slot": "ams",
|
||||
"description": "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution."
|
||||
},
|
||||
{
|
||||
"type_suffix": "GF",
|
||||
"action": "warning",
|
||||
"slot": "ams",
|
||||
"description": "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution."
|
||||
},
|
||||
{
|
||||
"vendor": "Bambu Lab",
|
||||
"type": "PLA",
|
||||
"name": "PLA Glow",
|
||||
"model_id": [
|
||||
"N1",
|
||||
"N2S"
|
||||
],
|
||||
"action": "warning",
|
||||
"slot": "ams",
|
||||
"description": "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite."
|
||||
}
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,194 +1,194 @@
|
|||
{
|
||||
"name": "Afinia",
|
||||
"version": "02.03.02.60",
|
||||
"force_update": "0",
|
||||
"description": "Afinia configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "Afinia H+1(HS)",
|
||||
"sub_path": "machine/Afinia H+1(HS).json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_common",
|
||||
"sub_path": "process/fdm_process_afinia_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.18_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.24_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.30_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.36_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.42_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_HS_common",
|
||||
"sub_path": "process/fdm_process_afinia_HS_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Fine @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.12mm Fine @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Optimal @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.16mm Optimal @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.20mm Standard @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Draft @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.24mm Draft @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.28mm Extra Draft @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.28mm Extra Draft @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.18_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.24_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.30_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.36_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.42_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "0.18mm Fine @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.36mm Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_abs",
|
||||
"sub_path": "filament/fdm_filament_abs.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS",
|
||||
"sub_path": "filament/Afinia ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+",
|
||||
"sub_path": "filament/Afinia ABS+.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+@HS",
|
||||
"sub_path": "filament/Afinia ABS+@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS@HS",
|
||||
"sub_path": "filament/Afinia ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS",
|
||||
"sub_path": "filament/Afinia Value ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"sub_path": "filament/Afinia Value ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA",
|
||||
"sub_path": "filament/Afinia PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA@HS",
|
||||
"sub_path": "filament/Afinia PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA",
|
||||
"sub_path": "filament/Afinia Value PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"sub_path": "filament/Afinia Value PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU",
|
||||
"sub_path": "filament/Afinia TPU.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU@HS",
|
||||
"sub_path": "filament/Afinia TPU@HS.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_afinia_common",
|
||||
"sub_path": "machine/fdm_afinia_common.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"sub_path": "machine/Afinia H+1(HS) 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "machine/Afinia H+1(HS) 0.6 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
"name": "Afinia",
|
||||
"version": "02.03.02.60",
|
||||
"force_update": "0",
|
||||
"description": "Afinia configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "Afinia H+1(HS)",
|
||||
"sub_path": "machine/Afinia H+1(HS).json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_common",
|
||||
"sub_path": "process/fdm_process_afinia_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.18_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.24_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.30_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.36_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.42_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_HS_common",
|
||||
"sub_path": "process/fdm_process_afinia_HS_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Fine @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.12mm Fine @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Optimal @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.16mm Optimal @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.20mm Standard @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Draft @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.24mm Draft @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.28mm Extra Draft @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.28mm Extra Draft @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.18_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.24_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.30_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.36_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.42_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "0.18mm Fine @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.36mm Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_abs",
|
||||
"sub_path": "filament/fdm_filament_abs.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS",
|
||||
"sub_path": "filament/Afinia ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+",
|
||||
"sub_path": "filament/Afinia ABS+.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+@HS",
|
||||
"sub_path": "filament/Afinia ABS+@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS@HS",
|
||||
"sub_path": "filament/Afinia ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS",
|
||||
"sub_path": "filament/Afinia Value ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"sub_path": "filament/Afinia Value ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA",
|
||||
"sub_path": "filament/Afinia PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA@HS",
|
||||
"sub_path": "filament/Afinia PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA",
|
||||
"sub_path": "filament/Afinia Value PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"sub_path": "filament/Afinia Value PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU",
|
||||
"sub_path": "filament/Afinia TPU.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU@HS",
|
||||
"sub_path": "filament/Afinia TPU@HS.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_afinia_common",
|
||||
"sub_path": "machine/fdm_afinia_common.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"sub_path": "machine/Afinia H+1(HS) 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "machine/Afinia H+1(HS) 0.6 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,37 +1,37 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,37 +1,37 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,31 +1,31 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,31 +1,31 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,34 +1,34 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,34 +1,34 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,27 +1,27 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,27 +1,27 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU@HS",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU@HS",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,37 +1,37 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,37 +1,37 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,40 +1,40 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,40 +1,40 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,82 +1,82 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,166 +1,166 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n;M106 P3 S0\n"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n;M106 P3 S0\n"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,82 +1,82 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n;{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n;{endif}\n\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n;{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n;{endif}\n\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,79 +1,79 @@
|
|||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,21 +1,21 @@
|
|||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_afinia_common",
|
||||
"printer_model": "Afinia H+1(HS)",
|
||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"207x0",
|
||||
"207x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "230"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_afinia_common",
|
||||
"printer_model": "Afinia H+1(HS)",
|
||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"207x0",
|
||||
"207x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "230"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,26 +1,26 @@
|
|||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Afinia H+1(HS) 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"printer_model": "Afinia H+1(HS)",
|
||||
"default_print_profile": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Afinia H+1(HS) 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"printer_model": "Afinia H+1(HS)",
|
||||
"default_print_profile": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,12 +1,12 @@
|
|||
{
|
||||
"type": "machine_model",
|
||||
"name": "Afinia H+1(HS)",
|
||||
"model_id": "my_afinia_h_1_hs_01",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Afinia",
|
||||
"bed_model": "",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Afinia ABS;Afinia PLA"
|
||||
"type": "machine_model",
|
||||
"name": "Afinia H+1(HS)",
|
||||
"model_id": "my_afinia_h_1_hs_01",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Afinia",
|
||||
"bed_model": "",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Afinia ABS;Afinia PLA"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,60 +1,141 @@
|
|||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["5000", "5000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["500", "200"],
|
||||
"machine_max_speed_e": ["25", "25"],
|
||||
"machine_max_speed_x": ["500", "200"],
|
||||
"machine_max_speed_y": ["500", "200"],
|
||||
"machine_max_speed_z": ["12", "12"],
|
||||
"machine_max_jerk_e": ["2.5", "2.5"],
|
||||
"machine_max_jerk_x": ["9", "9"],
|
||||
"machine_max_jerk_y": ["9", "9"],
|
||||
"machine_max_jerk_z": ["0.2", "0.4"],
|
||||
"machine_min_extruding_rate": ["0", "0"],
|
||||
"machine_min_travel_rate": ["0", "0"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"min_layer_height": ["0.08"],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retract_length_toolchange": ["2"],
|
||||
"z_hop": ["0.4"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_restart_extra_toolchange": ["0"],
|
||||
"retraction_speed": ["30"],
|
||||
"deretraction_speed": ["30"],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": ["1"],
|
||||
"default_filament_profile": [""],
|
||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"bed_exclude_area": ["0x0"],
|
||||
"machine_start_gcode": ";M190 S[bed_temperature_initial_layer_single]\n;M109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
"type": "machine",
|
||||
"name": "fdm_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
""
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": ";M190 S[bed_temperature_initial_layer_single]\n;M109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,119 +1,119 @@
|
|||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "M601"
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "M601"
|
||||
}
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Reference in a new issue